Pump models:Reini-Mini,Reini-Midi, Reini-1R, Reini-2R, Reini-3R,Reini-1S, Reini-2S, Reini-3S, Reini-4S
Reini submersible pumps are available in six different frame sizes. With different motor versions, they create 10 different pump variations.
Reini submersible pumps are used in a wide variety of applications. In general, the pumps are suitable for transferring flowing liquids. In civil engineering Reini pumps are often used for emptying trenches and for general water management. In agriculture, they are typically used to transfer various types of sludge. In slurry tankers, Reini pumps are commonly used as loading pumps in slurry tankers and as pre pump in drag hose systems. Even the smallest model works well for emptying septic tanks. In industrial applications, the pumps are used, for example, for cleaning clarification tanks in factory maintenance.
The pumps achieve a pressure level that is sufficient also for washing yard areas. Reini pumps are effective tools in all types of flood and spill accidents
Depending on the model, the pumps can be used with the hydraulics produced by a tractor, truck, excavator, small loaders or a separate hydraulic power unit. All Reini pumps share good operating efficiency. A great output is attained even with moderate oil production and hydraulic pressure.
The Reini submersible pump is a reliable choice! The pumps use high-quality and proven components. The impeller and pump housing of the Reini submersible pumps are made of wear-resistant steel. The pump frame is hot dip galvanized, which gives it good protection in hard conditions. The discharge pipe or hose is connected to the pump with a quick connect coupling, so moving and using is easy and fast.
The operation of the Reini submersible pumps is based on alternating pressure shocks. The pump has a 3-blade impeller and two discharge channels. The pressure shocks leave the pump chamber alternately and accelerate the flow at the junction using the ejector effect. The advantage of the design is high power in relation to the size of the pump and the discharge pipe used. In addition, the bearings are not subjected to high loads. Reini pumps are very stable in use, because the flow comes from below of the pump and immediately turned upwards. The pumps have no tendency to twisting, so they can be carried with a chain or simply lowered as is to the pumping target!
The cutting blades in the suction hole chop up grass and clumps. Reini submersible pumps are not sensitive to mud, stones or sand, but if necessary, the pumps can be equipped with a bottom strainer.
- Versatile uses
- High efficiency
- Light to handle, easy to move
- Tolerate use when dry
- Tolerate stones and other impurities well
- Made of wear-resistant materials
Reini-Midi brochure